Docomo F-02F Manual de instrucciones Pagina 111

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 199
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 110
Settings
109
Advanced Wi-Fi settings
1
From the Home screen,
[Settings]
[Wi-Fi]
2
[Advanced]
3
Set required items
Network notification :
Set to notify you when Wi-Fi open
network is available.
Wi-Fi Auto ON/OFF :
Turn Wi-Fi to ON/OFF automatically
using information from the mobile network base
station. Set whether to automatically turn Wi-Fi to ON
or OFF if detecting an area where Wi-Fi connection was
performed.
Wi-Fi sleep policy :
Set whether to use Wi-Fi when the
terminal screen is OFF or while the battery is charged.
Avoid poor connections :
Set whether not to use Wi-Fi
network when it is unstable.
Wi-Fi frequency band :
Set frequency band for Wi-Fi.
Wi-Fi optimization :
Set whether to minimize battery
usage when Wi-Fi is ON.
MAC address/IP address :
Show MAC address/IP address.
auto-IP setting :
Set whether ti enable auto-IP function.
INFORMATION
[Wi-Fi Auto ON/OFF] does not work if Airplane mode or Wi-Fi
tethering is ON.
The terminal may not connect automatically even when [Wi-
Fi Auto ON/OFF] is activated because Wi-Fi information in the
area is changed etc. In such case, connect manually.
Wi-Fi Easy Connection
You can connect through simple operations when connecting
via a Wireless access point supporting AOSS
or WPS.
1
From the Home screen,
[Settings]
[Wi-Fi
Easy Settings]
2
Select a registration method
AOSS
system : [AOSS system]
Tap [AOSS] button
Perform operations on the access point
On the
connection complete screen, [Finish]
For the first using, agree to "License Agreement".
WPS system : [WPS system]
[Push button system]/[PIN
entry system (8 digits)]/[PIN entry system (4 digits)]
Perform necessary operations on the access point
In case of push button method, press a dedicated button
on an access point. In case of PIN entry method, enter
PIN code displayed on the terminal to an access point
device and tap [OK].
INFORMATION
For some wireless LAN access points, AOSS
connection
may not be established. If connection is failed, use WPS
connection or connect manually.
When security on the wireless LAN access point is set to WEP,
you cannot connect in WPS system.
Vista de pagina 110
1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 198 199

Comentarios a estos manuales

Sin comentarios